Unfortunately, such methods only offer a temporary solution to rusting. Electrolysis is a better approach to the problem, but that will require a car battery charger, baking soda, a basin of water, and a sacrificial metal composed of iron. I bet you are already rolling your eyes at the list of components needed for this. Fortunately, there’s a simpler, and more thorough approach to rust removal; laser cleaning.
Due to the large peak power and the ability to generate phase-stabilized trains of ultrafast laser pulses, mode-locking ultrafast lasers underpin precision metrology and spectroscopy applications. Single-mode CW lasers with near transform-limited beam quality are available for industrial applications requiring average powers up to 10 kW and minimum spot sizes in the 25- to 30-µm range. High-brightness multimode lasers have output fiber core diameters in the 50- to 600-µm range with beam parameter product values starting at 2 mm×mrad. The output intensity distribution can be bell-shaped or flat-topped from an up to 1-mm core diameter . Nanosecond-pulsed Q-switched fiber lasers provide a range of average output powers, from 10 W to 2 kW.
Visit our Webinar page to register for free for any of our upcoming webinar events or browse our library of pre-recorded, on-demand video content. LasersLasers for materials processing, scientific research, life sciences, instrumentation, and defense. So by selecting a laser engraving, etching or marking system from TYKMA Electrox, you’ll know you are receiving the finest product available.
LaserMen Fiber laser cleaning machine is a high-tech product of the new generation of surface treatment. It focuses and reshapes the laser beam, and make the laser beam being the high-energy. Then the high-energy laser beam can be scanned and radiated to the surface of processing objects. So the attached objects on the surface of the object can be easily removed or peeled off.
DIVINE also offers best laser automation solutions,Our Experienced team will provide you best service and support. is done without damaging the substrate materials and without making contact with the material surface. Fiber laser cleaning has little risk of operator hearing damage, has no special ventilation requirements, and is more easily controlled when dealing with small parts. Lasers can provide high-speed cleaning and surface preparation in virtually all industries.